Dashcam fitting

All Hyundai Tucson related discussions
Post Reply
westfadave
Posts: 3
Joined: Wed Jul 31, 2024 3:58 pm

Post by westfadave »

I have just purchased the following
2025 Nline S mhev 1.6. Has anybody hard wired a dashcam into the cabin fuse box. If so which fuse is the best to use. I appreciate the model is new & maybe nobody has done this yet. In which case fitting into the previous model may help. Thanks in advance.

Bantam
Posts: 8
Joined: Fri Dec 23, 2022 3:57 pm

Post by Bantam »

I hardwired my Nextbase dashcam with the supplied Nextbase hardwire kit, I used a tester screwdriver to see which fuse was live when ignition off.
Then just plugged in the supplied kit.
westfadave
Posts: 3
Joined: Wed Jul 31, 2024 3:58 pm

Post by westfadave »

Thanks Bantam that was my thought process too. I also have the nextbase fitting kit so will test for the appropriate fuse. There will probably be several fuses that can be used. If you can remember the fuse you used or a photo of the set up then that would be really appreciated. Have a good day.
westfadave
Posts: 3
Joined: Wed Jul 31, 2024 3:58 pm

Post by westfadave »

Update. The following fuse was used to hard wire my Nextbase front and rear camera set up.
MODULE2/10A Front/Rear USB Charger Connector
Hope that assists.
chrisdobb
Posts: 34
Joined: Fri Aug 27, 2021 4:48 pm

Post by chrisdobb »

Check your warranty cover and also insurance cover, if you hard wire into a hybrids system it could give you problems in the event of a claim!
Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post